Đèn Xe Đạp Báo Tín Hiệu Rẽ Thông Minh Chống Nước Có Thể Sạc Lại

This small and bright LED bicycle light provides protection for you and your family, whether you are driving on a crowded road or enjoying nature in the wilderness. There are two colors, the main light is red, the left and right turn signals are yellow, easy to install, and waterproof material, which can make your riding road safer. Come on and try it. Features: The taillight emits an eye-catching beam, which can be seen from a distance, so there is no need to worry about being knocked down by others, which effectively guarantees the safety of riding. Installation is easy and fast. You only need to fix it on the pole under the cushion to make it work. The product has a specially treated shells and PCB circuit, so that the taillight can be used normally in rainy days. The waterproof grade IPX5 makes your riding safer, and you can ride with confidence in rainy days. The product adopts brightness energy-saving LED lamp, which has the characteristics of less power consumption and has a long service time. The USB recharging connector is suitable for various connectors, such as mobile power, computer interface, USB socket, car charger. A variety of recharging methods make recharging faster and more convenient. Specifications: Material: ABC+PCB Brightness: 500LM Light: LED Work time: 3-4 hours Light color: red,yellow Mode: left, right, flash Battery: 1 * lithium battery, 800mAh Battery recharging time: 2 hours Item size: 110 * 32 * 25mm / 4.3 * 1.3 * 1.0in Item weight: 150g / 5.3ounce Packing weight: 196g / 6.9ounce Packing size: 300 * 100 * 50mm / 11.8 * 3.9 * 2.0in Note: Installation: First pull the fixing bracket socket of the tail light upwards and tighten the strap buckle into the car tube. Then insert the tail light switch upwards into the socket of the bracket, and pull the rubber band of the remote control over the handlebar from the bottom to tighten and fasten it. Before use, press and hold the tail light power button for 4-6 seconds to confirm that the button light flashes, and then press and hold the middle button of the remote control for 3 seconds to confirm the induction connection. The middle button on the remote control can control the red LED warning light of the tail light, and the left and right buttons respectively control the yellow LED direction indicator on the tail light. When recharging the tail light, please press the upper card board of the bracket inward to pull out the tail light, open the rubber recharging port protection cover on the back of the tail light, use the USB recharging cable to charge. The red indicator light of the recharging port is on when recharging, and the indicator light is green when it is full. Packing List: 1 * LED Light 1 * USB Cable 1 * Remote Control 1 * User Manual 1 * Light Switch BuckleGiá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....