Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF
Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF
Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF
Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF
Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF
1 / 1

Hộp ổ cứng USB 3.1 Type-C SSD Hợp kim M.2 NVME / NGFF

0.0
0 đánh giá

M.2 SATA NVME to USB 3.1 hard drive enclosure.Features:Comply with SATA 3 specifications and comply with USB3.0 specifications.Support SATA NVME protocol, suitable for M2 (B Key/B+M Key/M Key) SSD.Su...

487.000
Chia sẻ:
amazingln

amazingln

@amazingln
4.2/5

Đánh giá

281

Theo Dõi

536

Nhận xét

Thương Hiệu
oem

Thương hiệu

OEM

Xuất xứ thương hiệu

China

Xuất xứ (Made in)

China

Sản phẩm có được bảo hành không?

Không

M.2 SATA NVME to USB 3.1 hard drive enclosure. Features:Comply with SATA 3 specifications and comply with USB3.0 specifications.Support SATA NVME protocol, suitable for M2 (B Key/B+M Key/M Key) SSD.Support M.2 SSD, 22*30mm, 22*42mm, 22*60mm, 22*80mm solid state drives, (SSD hard drives are not included).The output speed depends on the type of SSD you use, SATA (6Gbps), NVME (10Gbps).Dual protocol uses two kinds of cables, Type-C to Type-A (5Gbps) and Type-C to Type-C (10Gbps).The aluminum alloy shell increases the heat dissipation area, which facilitates the heat dissipation of the hard disk during work and increases the life of the hard disk.Support UASP protocol.Easy to use, no need to drive. Specifications:Material: Aluminum alloyColor: Black, Silver (optional)Main Control Chip: RTL9210BOutput Interface: USB 3.1 TYPE-CTransmission Rate: 10GbpsHard Disk Interface: M KEY, BM KEYSupport Protocol: Support NVME/NGFF Two ProtocolsSupport M.2 Hard Disk Size: 2230/2242/2260/2280 Four SizesSupport Capacity: 2TB MAXInstallation Method: Screw FixedSupport System: for Win/Mac/Linux/ AndroidItem Size: 120 * 30 * 8mm / 4.72 * 1.18 * 0.31inItem Weight: 37g / 1.31ouncesPackage Weight: 62g / 2.19ouncesPackage Size: 165 * 75 * 20mm / 6.5 * 2.95 * 0.79in Installation Steps:Use a screwdriver to unscrew the top screws and take out the PCB board.Align the slots and install the SSD hard drive.Tighten the screw at the bottom of the hard drive to fix the hard drive.Put the installed hard disk into the hard disk box and close the top cover. Packing List:1 * USB SSD Enclosure1 * Data CableGiá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Sản Phẩm Tương Tự