Bộ điều khiển đèn LED DRL 12-18V cho xe hơi

Features Specifications: Color:BlackMaterial:ABSSize:5x2.5x1.5cm(L*W*H) ,cable lengh 74cm Weight：32gVoltage：12-18VWorking current:3Atime-lapse power off:12s Wiring Instruction: The red and black wire (the end with a lug) are connected directly to the car battery + & - .The red wire goes to positive pole of the LED daytime running lights, the black wire of the output end is to goes to the negative pole of the daytime running lights. The yellow wire is to connect to the headlights (or dashboard lights), when headlights or dashboard lights are turned on, the brightness of the LED daytime running lights will be halved. Installation steps: Connect the output wires to the negative and positive wires of the LED lights Connect the yellow wire to the switch Conect the black input wire to the negative of the battery, then connect the red input wire to the positive of the battery Precautions: For this controller, the max. output current is 2A, exceed the rated value will damage it To avoid damage this controller, check the max current of the Led lights before installations Above steps should be strickly followed when installing, any short circuit will damage the controller immediately Package contents: 1 x daytime running lights controller Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....