Thiết bị cảm biến nhiệt độ lốp xe máy QC 3.0 với 2 đầu cắm USB cho điện thoại/máy tính bảng

Features: With a QC 3.0 fast charging USB output, it can charge mobile phones, tablets and power banks. Support battery voltage detection and display, and low-voltage alarm function. Specification: Tire pressure setting range: 0.1~6.0Bar Temperature setting range: 60℃~100℃ Working temperature: -20℃~+80℃ Storage temperature: -30℃~+85℃ Power voltage: DC 12V Output voltage: DC 12V, 9V, 5V Frequency: 433.92MHz±20.00MHz Receiver: Working temperature --20℃~80℃ Storage temperature: -30℃~85℃ Power-on voltage: DC 5V Frequency: 433.92MHz±20.00MHz Sensor: Working temperature: -20℃~80℃ Storage temperature: -30℃~85℃ Pressure range: 0~6.6Bar Pressure accuracy: +/-0.1Bar Temperature accuracy: +/-3℃ Frequency: 433.92MHz±20.00MHz Bracket installation instructions: 1. Unscrew the 2 screws, put on the motorcycle/electric bike and tighten; 2. Place the mounting head of the bracket toward the position you need, and confirm that the bracket is firm; 3. Install the tire pressure receiver on the bracket, tighten it and then lock it; use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately Power installation instructions: 1. When installing, the power cord needs to be connected behind the ignition switch, and the power can be automatically cut off after shutting down. The red connects to the 12V positive pole and the black connects to the ground. 2. Install the fixed bracket on the handlebar and lock it tightly. Install the host on the bracket and adjust the angle and lock it. 3. Install the sensor when the host is turned on. First install the tamper ring into the valve nozzle, then install the sensor on the valve according to the position and tighten it, then screw the tamper ring back and tighten it. If you find that there is no corresponding position on the host If the pressure is displayed, reinstall the sensor at the corresponding position. Package Included: 1 X Receiver 1 X Bracket 2 X Sensors 1 X Wrench 2 X Nut 1 X English manual Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....